Viewing equipment matching the following properties:
The AM16/32B multiplexer significantly increases the number of sensors that can be measured by a Campbell Scientific datalogger. It interfaces with the datalogger and adds terminals for wiring additional sensors of almost any type.
The furnace is designed to heat ash samples up to a maximum temperature of 1600°C in a controlled atmosphere and visually record the fusion of the samples for analysis. It is designed for biomass and combined (biomass/mineral) fuels.
The C 2000 basic IKA- calorimeter is a combustion calorimeter for determining gross calorific values of liquid and solid samples. A high level of automation with extremely simple handling characterizes this instrument. In addition to the isoperibolic
The TCAV-L typically provides the average temperature of the top 6 to 8 cm of soil for energy-balance in flux systems. It parallels four thermocouples together into one, 24-AWG wire. Each member of a thermocouple pair can then be buried at a differen
The PS100 provides a 12-Vdc, 7-Ah rechargeable power supply for the CR500, CR510, CR800, CR850, CR10, CR10X, and CR1000 dataloggers and peripherals. The rechargeable battery can be trickle-charged from ac power (requires optional wall charger) or fro
The ENC14/16 is a weather-resistant enclosure that is 14 in. wide and 16 in. tall. This medium-large enclosure can house a datalogger, a power supply, and one or more peripheral—depending on the size of the peripherals. A common use for the ENC14/16
The HOBO UX120M Pulse Logger is a highly versatile, 4-channel energy data logger that combines the functionality of four separate data loggers into one compact unit. It enables energy management professionals – from energy auditors to building commis
The ALPHA interferometer is based on Bruker Optics` patented RockSolid™ design, which is used in our laboratory and rugged process spectrometers. This means the ALPHA delivers the performance and reproducible results people have come to expect from a
The CR1000 is our most widely used datalogger. It can be used in a broad range of measurement and control functions. Rugged enough for extreme conditions and reliable enough for remote environments, it is also robust enough for complex configurations
The CR800 is a smaller, research-grade datalogger designed for stand-alone operation in harsh, remote environments. It is intended for smaller configurations in which fewer sensors will be measured. Each CR800 reads input from sensors, then transmits
