Measurement and Control Datalogger CR1000

The CR1000 is our most widely used datalogger. It can be used in a broad range of measurement and control functions. Rugged enough for extreme conditions and reliable enough for remote environments, it is also robust enough for complex configurations

Specifications

• Maximum Scan Rate: 100 Hz
• Analog Inputs: 16 single-ended or 8 differential individually configured
• Pulse Counters: 2
• Switched Excitation Channels: 3 voltage
• Digital Ports1: 8 I/Os or 4 RS-232 COM2
• Data Storage Ports: 1 CS I/O, 1 RS-232, 1 parallel peripheral
• Switched 12 Volt: 1
• Input Voltage Range: ±5 Vdc
• Analog Voltage Accuracy: ±(0.06% of reading + offset), 0° to 40°C
• Analog Resolution: 0.33 µV
• A/D Bits: 13
• Power Requirements: 9.6 to 16 Vdc
• Dimensions: 23.9 x 10.2 x 6.1 cm
• Dimensions with CFM100 or NL115 attached: 25.2 x 10.2 x 7.1 cm
• Weight: 1.0 kg (2.1 lb)
• Protocols Supported: PakBus, Modbus, DNP3, FTP, HTTP, XML, POP3, SMTP, Telnet, NTCIP, NTP, SDI-12, SDM
• CE Compliance Standards to which Conformity is Declared: IEC61326:2002
• Warranty: 3 years

Temperature Range

• Standard: -25° to +50°C
• Extended: -55° to +85°C

Memory

• Operating System: 2 MB Flash
• CPU Usage, Program Storage, and Data Storage: 4 MB

Current Drain

• Sleep Mode: 0.7 mA typical; 0.9 mA max.
• Active (w/o RS-232 communication): 1 to 16 mA typical
• Active (w/RS-232 communication): 17 to 28 mA typical

broad range of measurement and control functions