Stay up-to-date with latest news from us
Contacts and Location
| Enquire about this equipment | |
| Organisational Unit |
Riga Technical University Faculty of Natural Sciences and Technology Institute of Biomaterials and Bioengineering - Latvia, Rīga |
Description
Surface Area and Pore Size Analyzer is designed to satisfy busy laboratory needs for high analytical throughput, without sacrificing precision, flexibility or cost-effectiveness. Four simultaneous and independent analysis ports remove the limitations of single dewar systems allowing samples to be started as soon as previous measurements are completed. A dedicated transducer has been provided for measurement of Po (adsorbate saturated vapor pressure), so that continually measuring Po does not slow down analysis capabilities. The new BET “QuickModeTM” provides high throughput industrial materials characterization labs the ability to process samples at dramatically improved speeds. This measurement flexibility has never before been available in such a compact and cost-effective package.
Specification
Height: 29.0 inches (73.6 cm) Height Open: 44.0 inches (111.6 cm) Width: 25.25 inches (63.7 cm) Depth: 21.0 inches (53.3 cm) Depth Open: 26.2 inches (66.5 cm) Weight: 57.5 kg (127 lbs.)* Electrical: 100 - 240 VAC, 50/60 Hz Environmental: 10 - 38°C operating range at 90% maximum relative humidity. Six 1000 torr transducers (one on each sample station, plus dosing manifold and Po manifold) plus one# 1 torr transducer (dosing manifold) Transducer Accuracy: 1000 torr: 0.11% full scale 1 torr: 0.15% reading Pressure Resolution: 0.016 torr (1000 torr range). 0.000016 torr (1 torr range). Ultimate Vacuum: <1x10-2 torr achieved by dedicated two (2) stage rotary, direct drive pump 1x10-9 torr achieved by turbomolecular vacuum pump in QUADRASORB evoTM- Kr/MP Adsorbate: Nitrogen or any other non-corrosive gas with appropriate coolant Surface Area Range: 0.01m2/g to no known upper limit (nitrogen) 0.0005 m2/g to no known upper limit (krypton) Kr/MP model only Minimum Pore Volume: (liquid): 2x10-6 cc/g (STP): 0.0001cc/g Pore Size Range: 3.5 - 4000Å / 0.35 - 400 nm Minimum P/Po (N2): 1 x 10-3 QUADRASORB evoTM 4 x 10-5 QUADRASORB evoTM- Kr/MP Coolant Level: Automatically maintained at a level around the sample cell to minimize cold zone volume."
Services
Surface area analysis
Contract title
Contract short description
Contract full description
Augstums: 29.0 collas (73.6 cm) Atvērtais augstums: 44,0 collas (111,6 cm) Platums: 25.25 collas (63.7 cm) Dziļums: 21.0 collas (53.3 cm) Atvērtais dziļums: 26,2 collas (66,5 cm) Svars: 57,5 kg (127 mārciņas) * Elektriskie: 100 - 240 VAC, 50/60 Hz Vide: 10 - 38 ° C darbības diapazons pie 90% maksimālais relatīvais mitrums. Seši 1000 torr devēji (pa vienam katram paraugam stacija, kā arī dozēšanas kolektors un Po kolektors) plus viens# 1 torr devējs (dozēšanas kolektors) Devēja precizitāte: 1000 torr: 0,11% pilna skala 1 torr: 0,15% lasījums Spiediena izšķirtspēja: 0,016 torr (1000 torr diapazons). 0,000016 torr (1 torr diapazons). Galīgais vakuums: <1x10-2 torr sasniegts ar diviem (2) Pakāpju rotācijas sūknis ar tiešo piedziņu 1x10-9 Torr sasniegts ar turbomolekulāro vakuumsūkni QUADRASORB evoTM- Kr/MP Adsorbāts: Slāpeklis vai jebkurš cits nekodīgs gāze ar atbilstošu dzesēšanas šķidrumu Virsmas laukuma diapazons: 0,01m2/g līdz nav zināma augšējā robeža (slāpeklis) 0,0005 m2/g līdz nav zināma augšējā robeža (Kriptons) Tikai Kr/MP modelis Minimālais poru tilpums: (šķidrums): 2x10-6 cc/g (STP): 0.0001cc/g Poru izmēru diapazons: 3,5 - 4000Å / 0,35 - 400 nm Minimālais P/Po (N2): 1 x 10-3 QUADRASORB evoTM 4 x 10-5 QUADRASORB evoTM- Kr/MP Dzesēšanas šķidruma līmenis: Automātiski tiek uzturēts līmenī ap parauga kivete, lai samazinātu aukstās zonas tilpumu.
Funding Source
| EU Structual Funds (ERAF, ESF) | - |
|---|
Manufacturer
Anton Paar QuantaTec Inc.
Model
Quadrasorb evo Kr/MP
Funded by EU
Project supported by:
